We said we liked a challenge. Here’s the next one.
Carbon Fox, a manufacturer of carbon-fibre parts for the automotive industry, was getting its space ready for filming a programme. It wanted bold branding that would look good on camera and give the studio some character.
The project covered around 10 m² and called for plenty of detail and carefully blended tones. But the real test was the location. The highest point of the graphic was almost 7 metres above the ground.
The printer had to operate from scaffolding, around 2.5 metres above the floor. And then there was the surface: sandwich panels, where traditional decorating methods were out of the question.
How do you tackle a job like that? We knew this wasn’t a case of turning up, setting up the printer and getting started. First, we had to work out how to build a stable setup that would let us print safely and accurately at that height.
Here’s how we did it.
Carbon Fox needed a backdrop that would look good on camera
Our client, Carbon Fox, makes carbon-fibre parts for cars that compete in events including the Dakar Rally. The quality had to be spot on.
The branding had to do several jobs at once:
- reflect the character of the business and reproduce its logo accurately;
- look good on camera;
- make the most of a large, high and tricky surface;
- be ready before a fixed filming date. Time really mattered.
This is where wall printing comes into its own. With the wall printer⁺ pro, we print the design directly onto the surface. There’s no need to make separate panels, cut wallpaper to size or fit multiple pieces to the wall. You can tailor the graphic to the dimensions, layout and character of the space, then print it on site, even in a working venue.
Let’s take a look at this particular project. As you can see, the graphic had plenty of detail and tonal shading:

Set up first, print second: preparing to work almost 7 metres up
Spoiler: the print itself went smoothly. But before the printhead could get moving, we had to get the whole setup right.
When you’re working at height, the printer isn’t the only thing to think about. You also need to consider what it’s standing on, how far it is from the wall and whether there’s enough room to work. Our aim was to minimise unwanted movement and keep the setup stable.
How did we do it?
1. We checked the structure was stable and secure
Even the most precise printhead can’t produce a good result if the structure beneath it wobbles every time it moves.
For the Carbon Fox installation, we secured the 2.5-metre scaffolding in two places. We fastened it to pillars and used a forklift truck to hold it firmly in place. That solution was specific to the conditions at the site. In wall printing, a bit of ingenuity goes a long way.
If you’re planning to work from a raised platform, check that:
- the scaffolding is on stable ground;
- it won’t shift while you’re working;
- you can secure it further if needed;
- the structure doesn’t start moving under the weight of the wall printer;
- you can operate the machine from a stable position.
2. Getting the distance from the wall right
The second challenge was positioning the scaffolding at just the right distance from the wall. The printhead had to be able to reach the surface and move properly.
When you’re working at height, small details like this can make or break the setup.
A useful tip: measure the wall before you arrive and plan exactly where the structure needs to go.
3. Plan the space before you need it
We needed enough room at the top of the scaffolding for the printer to move. We also needed space to monitor the machine and respond if anything changed during the job.
From the floor, the scaffolding might look big enough. Once it’s in position, you may realise that:
- there isn’t enough room to manoeuvre safely;
- the operator can’t work comfortably or respond quickly if something goes wrong;
- the machine can’t complete the full planned route.
That’s why we plan the printer’s movement from start to finish on more challenging jobs. Where will the print begin and end? Which way will the printer move? Will the operator be able to reach the machine at every stage? Only once you know the answers is it time to start printing.
The result: precise printing despite the height and limited space

At Carbon Fox, we printed around 10 m² of graphics, including fine details and tonal shading, onto sandwich panels. The highest point was almost 7 metres above the ground. The printer operated from a prepared and secured scaffold, around 2.5 metres above the floor.
Quite a project.
The main lesson isn’t that a printer can handle any height. It’s that challenging jobs are possible when you prepare the workspace properly first.
That’s the foundation of a successful installation.
A well-prepared setup lets you make the most of the printer’s precision and its ability to print directly onto a range of surfaces.
That’s why we enjoy projects like this. The best part isn’t just how impressive the finished result looks. It’s everything that happens beforehand: finding a solution, preparing the setup and making unusual conditions work.
Want to take on projects like this for your own customers?
The Carbon Fox installation shows what’s possible. Businesses need a quick, straightforward way to transform their walls, and you could offer it as a service.
Picture this: the owner of a chain of car showrooms calls. They want a striking, large-scale logo on a bare brick feature wall. They need it soon, with no dust, no paint fumes and no disruption to the showroom.
Trying to do that with a brush and paint, or with vinyl on a difficult surface, would be a real challenge. As a wall printer, you can offer a fast solution for jobs that traditional finishing methods struggle with.
It could open the door to projects across a range of sectors:
- Business and industry – large-scale signs in factories and warehouses, and branding in offices and showrooms.
- Hospitality and events – graphics in restaurants and hotels, or personalised backdrops for photo shoots and agency productions.
- Specialist projects – printing on difficult surfaces, at height or in places where a business can’t afford a lengthy refurbishment or shutdown.
Your customers have one thing in common: they have a blank surface and an idea. Time, the surface itself or the scale of the project is getting in the way.
For businesses in construction and finishing, advertising or other service industries, a wall printer can help you take on high-margin jobs that others may have to turn down.
A challenging job can become manageable with support from wall printers⁺
Would you like to take on projects like this, but worry that difficult surfaces or unusual spaces might be a step too far? As part of the wall printers⁺ community, you can get advice from our team before your next challenging job. Get in touch and we’ll look at the project with you and share practical guidance.
Want to see how a wall printer works? Leave your details in the form and we’ll give you a call, show you what it can do and answer your questions.
FAQ
Not sure if this business is for you? Want to know the details or get started right away?
Explore our resources
Discover our collaboration process
Take the first step and we’ll do the rest
Send the form and we’ll email you our price list straight away, with all the packages and what’s included. One of our advisers will be in touch within one working day. No hard sell, just answers to your questions.


